ARclean® 90420
Product Applications
The typical use for this product is fabrication of filters for hard disk drives (HDDs) where clean strippability off of HDD base plates and covers is required for rework after burn-in.
Features and Benefits
Product Construction
| Typical Values* | Description | |
|---|---|---|
| Backing thickness | 2.0 mil | 50 μm | Clear polyester film |
| Adhesive thickness | 1.5 mil | 37 μm | AS-139, acrylic adhesive |
| Liner thickness | 2.0 mil | 50 μm | Clear polyester release liner |
| Total thickness | 3.5 mil | 87 μm | (Excluding liner) |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
Technical Properties
| Attribute* | Typical Values* | Test Method* |
|---|---|---|
| Peel adhesion on stainless steel | 60 oz/inch | 16.2 N/25mm | 180 degrees, 12 ipm, 5 min. dwell |
| Static shear on stainless steel | Does not fail cohesively | ½” x ½”, 250 grams, 70°C |
| Release of S/F line | 35 g/2” | 180 degrees, 300 ipm |
| Recommended storage of unconverted product | 70°F ± 20°F | 21°C ± 11°C
50% ± 20% RH | 50% ± 20% RH |
|
| Shelf life of unconverted product | Not to exceed one year from date of manufacture |
*All stated values are nominal and should only be used as a guide for selection. They are not specifications.
Let’s Discuss Your Requirements
